Main Repair Questions Quadro M4000 – Please power down and connect the PCIe power cables

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #10770
    nightdancer
    Participant
      • Topics 1
      • Replies 2
      • Total 3
      • New Member

      Hello, I have a Quadro M4000 graphics card but when i start PC displays the following message “Please power down and connect the PCIe power cables for this graphics card”, obviously the cable is plugged in.
      I checked under the thermal imaging camera that the card is working and drawing power
      I don’t have the schematics to the card, do any of you know what is responsible for the signal about connecting additional power supply

      #10826
      NorthridgeFix
      Keymaster
        • Topics 0
        • Replies 67
        • Total 67
        • Admin

        The first thing i would do is try another power supply. You have have 12v but the supply may be failing on Load.

        #10886
        nightdancer
        Participant
          • Topics 1
          • Replies 2
          • Total 3
          • New Member

          I have a second identical card and it works normally on this power supply. I also checked another power supply and it is the same

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.