The stand is not part of the package and must be purchased separately. You can buy it from Amscope on eBay. The stand is very heavy and not economical...

@Ped is right. The probes that we use are per the link provided. Best precision probes I've used by far The tip is bent because the probe hit the gro...

Very good topic for a video. I'll make one soon. It basically boils down to the amount of work on hand Vs progress Vs results. 1. If you work very ha...

Never scrap or file the tip. Once you do, it's only a matter of days before it becomes useless and solder won't stick. Tip tinners are also bad. Tinne...

0.8mm is what normally use and 0.3mm when I need to be more in control.

I don't understand the question. How are you going to mount the scope. Articulating arm is a good investment and a must if you plan to move the scope ...

Look for a 1200w hot air station because sooner or later you will realize the 1000w is not enough specially if you decided to work on multi layer boar...

JCID AIXUN T3B is an amazing Soldering Station for the price with tips that are easy to change. Weller WX2 is still the easiest station to change tips...

I agree with @emailbuga. However No many components on this Fob. If you can get your hands on a similar board with different frequency, you can swap...

It could be a lot of things. On some laptops fans do not spin until temperature reaches a certain degree. You need to manually probe for a short by me...

The inductor is likely not the problem. It's never the inductor unless you see physical damage, crack or abnormal discoloration as per some of the vid...

Diagnostic software is almost never used in the repair business especially when a device is dead and does not power on. I used to use Tech Tool Pro an...