Hello Sir. I bought a Asus z87-k Rev. 1.05 motherboard on ebay but when I got it it did not work (Bad luck I guess) I have tryed to contact the seller but without luck. I don`t have no possible to buy a newer card so I`m stuck with this, a 1150 socket board. Okay, the problem is the booting. The light on the board works, the fans works and the hdd runs. but no booting on the screen. I have tryed to change the hdd, the memory, the cables, the battery. No matter what I try the board will not boot. The Psu is new. I can`t see any burned marks anywhere on the board. The light is not flashing but are at stand still. The power led lamp don`t work, ether does the hdd led light. the Cpu is used but working. I know this because I have used it on another board like this one. I don`t know what happen to my old board but it went black and that`s it. So I bought a new (used) board from England. I don`t have money for a upgrade for this computer so I`m stuck with this board, To bad we can`t trust everyone. I living in norway so long way to fix it lol. I have seen your videos Sir and i like it. I`m also about to email you about a repair on this board. I don`t know how much this will cost and it`s a werry long way and a long waiting time. So therefore I asking here first if there anything I can try to get it to work. I am familiar with using a multimeter but not how to solder a motherboard. So please, Do you have any tip for me to try before I sending it to you ?
Regards from Tommy
Hello Sir. I bought a Asus z87-k Rev. 1.05 motherboard on ebay but when I got it it did not work (Bad luck I guess) I have tryed to contact the seller but without luck. I don`t have no possible to buy a newer card so I`m stuck with this, a 1150 socket board. Okay, the problem is the booting. The light on the board works, the fans works and the hdd runs. but no booting on the screen. I have tryed to change the hdd, the memory, the cables, the battery. No matter what I try the board will not boot. The Psu is new. I can`t see any burned marks anywhere on the board. The light is not flashing but are at stand still. The power led lamp don`t work, ether does the hdd led light. the Cpu is used but working. I know this because I have used it on another board like this one. I don`t know what happen to my old board but it went black and that`s it. So I bought a new (used) board from England. I don`t have money for a upgrade for this computer so I`m stuck with this board, To bad we can`t trust everyone. I living in norway so long way to fix it lol. I have seen your videos Sir and i like it. I`m also about to email you about a repair on this board. I don`t know how much this will cost and it`s a werry long way and a long waiting time. So therefore I asking here first if there anything I can try to get it to work. I am familiar with using a multimeter but not how to solder a motherboard. So please, Do you have any tip for me to try before I sending it to you ?
Regards from Tommy
Okay after some more inspection I discover a problem that are beond repair. I wanted to take another look at the cpu socket and almost all of the pins are bended flat to the socket. I think this must have happend under the transport to me, because he only used a soft cardboard over the socket, he taped the cardboard there. The overall box was small with some hard fome over the board. So. That`s it I guess.